Tracker Parts List

Front Axle - GM King Pin Dana 60

  • Passenger Drop Kingpin Dana 60 (Sourced used)

  • 7.17 Ring & Pinion with partial overhaul kit, part 706033-8X

  • Carrier bearing set, part 706047X

  • U-joints, part SPL55-3X

  • Detroit locker, part EAT225SL29A

  • Hub Conversion to SRW width

  • Truss ( for upper link mount surface ), part b4wk1133

  • High steer knuckle plates , part DANA60ARMS

  • High steer studs, part RR-D601217K-2

  • King pin rebuild kit, part WFO KP-HD-002

  • Inner seals, part NS470682

Rear Axle - Full Float Dodge Dana 70

  • Full Float Dodge Dana 70 ( Sourced used )

  • 7.17 7.17 Ring & Pinion with partial overhaul kit, part 706999-15X

  • Carrier bearings, part 706047X

  • 70 locker, 225SL58C

  • 70 truss, B4wk1002-3

  • Wheel bearing kit, Sku 8321, UPC 763854203910

  • Spindle nut and socket kit, Sku 4013, UPC 763854202951

  • Spindle nut lock washer, Sku 40051, UPC 763854205631

  • Disk brakes, R2443 + parking brake option, Part: R2262-A, Part: R2200

Front Suspension

  • 18 inch ORI struts, part STX-18-AA-BLK

  • Double Triangulated 1 1/4 Chromoly Heims 4 Link Kit, part B4WK1153

  • Tube kit for control arms, part B4WK0066

  • HW / Bolts / Nuts Kit, part B4WK1056

  • Bumps stops, part DYS-KU09014BK

  • 22” Limit straps, part B00FB82C6G

  • 18” Center limit strap, part B00FB82B4O

  • Limit strap mounting tabs (Pairs), part B4WSBTP

  • Upper Strut Bolts

    • 5/8 x 4 Grade Eight, part B4WK0010

  • Lowe Strut bolts

    • 5/8 x 3.25 Grade Eight, part B4WK0009

Rear Suspension

  • 18 inch ORI struts, part STX-18-AA-BLK

  • Double Triangulated 1 1/4 Chromoly Heims 4 Link Kit, part B4WK1153

  • Tube kit for control arms, part B4WK0066

  • HW / Bolts / Nuts Kit, part B4WK1056

  • Bump Stops, part DYS-KU09014BK

  • Upper Strut Bolts

    • 5/8-11X6.5 Grade 8 Bolt, part FA HBG8-5/8-11X6.5

  • Lowe Strut bolts

    • 5/8 x 3.25 Grade Eight, part B4WK0009


Transfer Case & Drive lines

  • Trail-Gear T-Case Gear Set, 4.24:1

  • Overhaul kit

  • Twin stick kit

  • Speedo cable replacement

  • Front and rear Slip Yoke Eliminator fabricated from old slip yoke + factory pinion flanges. Cut and welded together with bolt stud welded to center of output shafts.

  • Front drive line - Fabricated from factory front drive line and JK 1310 front drive shaft. Factory plate mount and factory u-joint at t-case side. 1310 u joint at new axle side.

  • Rear drive line - Fabricated from factory rear drive line and JK 1350 rear drive shaft. Factory plate mount and factory u-joint at t-case side. 1350 u joint at new axle side.

    • RDL FLANGED YOKE STYLE CV CENTERING ASSEMBLY - 1310 SERIES (SUZUKI CONVERSIONS) w/3.330 bolt circle, part R2-21-3167

  • Speedo cable replacement

Steering

  • Tapped Box, part 305025-3

  • Tapped box fittings, part 130263-1-KIT

  • PSC Ram kit, part SC2201K

  • Hose kit, part HK2015

  • Tie Rod & Drag link kit, part B4WK0100

    • 3/4 x 4 Grade Eight Bolt and Nylock Nut, part B4W0019K

  • Steering Cooler ( used from existing stock)

Tires / Wheels

Super Swamper 38.5x14.50R16LT, TrXus MT Radial Tires, part SSTRXM-34

16" Aluminum wheels

Misc. / Other

  • Front brake lines and adapters

    • M1 brake line adapters for front, part 410103

    • Speedway 48 Inch Stainless Steel Brake Line w/ 90 Degree AN3 End, Part #: 91031895-3

    • Speedway 7/16"-24 to -3 AN Banjo Bolt and Fitting Kit, Part #: 9108375